Root ZX mini is compact, lightweight, and portable. It can be placed on the tray or any other convenient place.
- Accurate measurement
- No zero adjustment
- Automatic calibration
- Large colour LCD display
- Memory bar with 3 programms
- 4 colours available
Utilizing the ratio technique, Root ZX mini provides a highly accurate indication of the file’s location. The accuracy of the measurement is not affected by the presence or absence of blood, other discharges, electrolytes, saline, tap water, or hydrogen peroxide.
No Zero Adjustment
It is not necessary to set the device on zero before measuring each individual canal.
Automatic calibration ensures accuracy and eliminates the effect of changes in temperature, moisture, etc. inside the canal, even during treatment.
Compact and Lightweight Design
Root ZX mini measures just over 4“ x 2⅓” and weighs 3.88 ounces. Its compact size and stable design allow for excellent flexibility during procedures. It can be placed on the tray or any other convenient location for the clinician.
The color liquid crystal display is easy to read, providing a clear progressive display and high contrast. The positions of the Flash Bar and the Memory Bar can be set as guides for canal measurement and enlargement.
1 – Flash Bar
The reference point for measurement or enlargement can be set anywhere between 2 and APEX.
2 – Memory Bar
It can be used to mark the beginning of a sharp curve or some certain distance from the apex. It can also be used as a guide when the file size is changed for canal enlargement. The memory bar can be set only by the measurement state.
3 – Information Display
Number of bars left before flash bar is reached (during measurement). Memory number for flash bar (without measurement).
4 – Liquid Crystal Display
5 – Canal Length Indicator Bars
6 – Sound Volume (off, low, high)
7 – Battery Power Indicator
How to Use:
1. The meter is activated when the file is inserted into a root canal. The number of bars remaining before the file reaches the flash bar is shown in the lower left corner of the display.
2. When the file tip reaches a position near the apex, the bar color changes to green to indicate you have reached a critical area.
3. When the file tip reaches the preset position of the flash bar, the flash bar stops blinking and stays on.
4. When the file tip passes the apex, the “APEX” and “t” indicators start blinking.
1× probe cord
3× file holders
5× contrary electrodes
1× canal-length tester
3x 1.5 VDC AAA size battery
|Charge Level Indicator||Yes|
|Height | Width | Depth||57mm | 103mm | 60mm|
|Battery||3 Alkali Battery AA|
|Display Screen||Coloured LCD|
|Audio Volume Indicator||Yes|
NO registration required!
If the question you have has not yet been answered here, use the form below to ask something about this addon.