Dr.SOS, the kit for easy removal of broken abutment screw and regeneration of damaged internal threads in the fixture.

Contents:

1. Slot Driver 0.3

When Torx Abutment Screw Head was damaged, you can use 0.3 Slot Driver instead of 1.7 Torx Driver.

2. External Guide External Connection

It is connected to fixture and guides through Remove Bar to enter and support broken abutment screw.

3. Internal Guide Internal Taper Connection

It is connected to fixture and guides through Remove Bar to enter and support broken abutment screw.

4. Remove Bar

Use it under 25-20 RPM in reverse rotation.

5. Reverse Cutting Drill

Connect the Reverse Cutting Drill to low speed handpiece with 1,000~2,000 RPM in reverse rotation Then, repeat drilling up and down to grind and change the top of the broken screw.

CAUTION: Be careful not to break it with overheating.

6. Screw Tapping

When internal threads in the fixture were damaged, use Screw Tapping
to regenerate xture internal threads.

Applications and Protocol:

A) Removing broken abutment screw

After cleaning thoroughly broken screw area repeat inserting oral-use oil to let the broken screw out.
   

Locate a proper guide from the "Dr.SOS Kit" onto a fixture inside mouth and support it securely to make it vertical.

You can use ratchet to support the guide when it's hard to support the guide by hand.
   

You can use remove bar in two ways:

I) Remove Bar

Connect Remove Bar to the Handle, reverse it by hand to remove the Broken Abutment Screw, and be careful not to drop the product into the mouth.
  

II) Remove Bar + Handpiece

After connecting the Remove Bar into low speed handpiece it is also possible to remove it with reverse rotation of low RPM less than 25 RPM Remove Bar and drill extension connection enables a longer use.
  

Use explore to completely remove it after reaching certain height.
   

B) Regeneration of damaged internal threads in the fixture

When fixture internal threads were damaged use Screw Tapping to regenerate fixture internal threads and connect Abutment.
  

When pulling, hand will feel it touches If no touch on hands feel, lean guide and bur left and right until getting feel.