Available models in Iran

Zimmer - Screw–Vent Tapered
Diameter 3.7 - 4.1 - 4.7 - 6 Height 8 - 10 - 11.5 - 13 - 16
Zimmer -  SwissPlus Tapered
Diameter 3.7 - 4.8 Height 8 - 10 - 12 - 14
Zimmer - Trabecular
Diameter 4.1 - 4.7 - 6 Height 10 - 11.5 - 13
For more information Click on the above pictures

+ Advantages

- MTX Surface ---> Increase bone and implant contact

- Trabecular metal dental implant

- Use of impression in SwissPlus package as final abutment

- Available in different sizes and models

- Compatible with the most of other implant systems

- Disadvantages

- Useless of the impression in SwissPlus package for non-prosthetic dentist

Products

1. Tapered Screw – Vent Family

       1-1 Tapered Screw – Vent Implant System

       1-2 Screw – Vent Implant System

       1-3 Advent Implant System

       1-4 One – Piece Implant System
   
2. SwissPlus
3. Trabecular Metal Dental Implant
4. Spline

1. Tapered Screw – Vent Family
   

1-1   Tapered Screw – Vent Implant System

• Two-stage or single-stage implant system
• Internal hex connection ---> Abutment stability and virtually eliminates micromovment
• Tapered implant body ---> Facilitates initial implant stability and it placement
• MTX or MP-1 HA surface
• Self-Tapping and triple –lead threads

1-2   Screw – Vent Implant System

• Internal hex connection ---> Forms a virtual "cold weld" between  the implant and abutment ---> Prevent screw loosening and maintain level

• MTX Surface ---> Enhances bone apposition and efficient self-tapping
• Self-Tapping ---> Reduces surgical time
• Triple-lead threads ---> Faster insertion
• Color code guide

1-3   Advent Implant System

• Single-stage implant system ---> Minimizes valuable chair time and lessens patient trauma
• Immediate loading protocol
• Tapered design ---> Enhances initial stability
• Internal hex connection

1-4   One – Piece Implant System

• Zimmer One-Piece Implants bring greater simplicity and convenience to the restoration process and offering a unique one-piece solution for fast, convenient immediate restoration with minimal or no abutment preparation.
• The 3.0mm Zimmer One-Piece Implant is indicated for small incisor locations. The 3.7mm and 4.7mm Zimmer One-Piece Implant are indicated for all tooth locations, allowing for versatility to choose between a Tapered Screw-Vent Implant or Zimmer One-Piece Implant in a large variety of cases. Because Tapered Screw-Vent and Zimmer One-Piece Implants share a common body design and similar drilling sequence, the clinician may alter their treatment plan between these one-piece and two-piece implants at any time during planning or placement.

• Color-coded snap-on impression caps ---> Simple abutment-level impressions
• Provisional copings ---> Facilitate the creating provisional crowns
• Abutment analogs and waxing copings ---> Assist the laboratory in final crown fabrication

The Contour Restorative Kit includes an impression cap, provisional coping, waxing coping and abutment analog.

   

2. Tapered SwissPlus
   

• Single-stage implant ---> Simplifies your implant cases and Time savings
• Packaged with an all-in-one Fixture Mount/Transfer ---> Used for insertion, impression taking and as a customized final abutment
• Self-tapping flutes ---> Eliminate a step in the placement process
• Double lead threads ---> Faster implant insertion
• Tapered body design ---> Increases initial stability and osseocompression in soft bone
• Narrow diameter platform ---> Tight interdental spaces
• Full assortment of SwissPlus prosthetics ---> Supports all possible restorative needs
• Internal connection ---> Enhanced sense of engagement and reduced micromovement
• Narrow 3.7mm Tapered SwissPlus implant design has an internal hexagon platform and all other diameters have Internal octagon connection.
• MTX surface ---> Enhanced bone apposition, greater bone-to-implant contact with higher removal torque values

 3. Trabecular metal dental implant

• Material: Tantalum
• Uniform three-dimensional cellular architecture
• Biocompatible
• Similar to cancellous bone
• More than 80% porosity
• Interconnected pores network ---> Bone ongrowth and bone ingrowth (osseoincorporation)
• Coronal, apical and internal implant structures are made of titanium alloy (Ti‐6Al‐4V, grade 5) with MTX surface
• Internal hex connection
• Apical self-tapping threads

   

4. Spline
  

4-1   Spline Twist

• Spline Implant Connection ---> Interdigitating projections and slots ---> Form a precise lock between Spline implant and abutment ---> Reduce joint failure
• Three self-tapping spiral flutes ---> Reduce surgical time, greater implant stability and decreased lateral play
• Snap Delivery System ---> Simple, convenient, and sterile insertion
• MTX or MP-1 HA surface

4-2   Spline Reliance HA Cylinder

• Spline Implant Connection
• MP-1 HA surface

Sources:

• Comparison of Resonance Frequency Analysis and of Quantitative Ultrasound to Assess Dental Implant Osseointegration. Sensors (Basel). 2018 May; 18(5): 1397.
• Development and Applications of Porous Tantalum Trabecular Metal Enhanced Titanium Dental Implants. Clin Implant Dent Relat Res. 2014 Dec; 16(6): 817–826.
• A retrospective study on a series of 556 zimmer dental implants. Dent Res J (Isfahan). 2012 Dec; 9(Suppl 2): S181–S185.