Morita - Root ZX II OTR Module
Revolutionary Canal Preparation Technology
The Root ZX II Low Speed Handpiece with OTR technology prepares root canals while displaying precise and accurate measurements.
During file rotation, the torque is automatically measured. If the torque is less than the set value, the file rotation continues, but if the torque has reached the set value, the file reverses rotation by 90° and then continues in the cutting direction once again. OTR reduces file fatigue, as well as the possibility of file breakage.
Lightweight, the handpiece is ergonomically designed to minimize fatigue and fingertip stress and is ideal for endodontic access. It offers 3 speed settings of 100, 300 & 500 rpm and 3 programmable memory modes.
- Safely & efficiently clean & enlarge canals with OTR technology
- Reduces the possibility of file breakage
- Standard Ni-Ti file can be used – no need for special files
- New contra head has internal file electrode
- OTR Module can be connected to any Root ZX II
When the torque setting is reached, the file auto reverses 90° then continues again in the cutting direction. OTR reduces file fatigue, as well as the possibility of file breakage.
Auto Motor Start/Stop
No foot switch required. Motor starts when file is inserted into the canal and stops when it is withdrawn.
Auto Torque Reverse
Reduced file breakage. File stops and reverses if the torque goes over the set torque limit. There are 11 torque settings.
Auto Torque Slow Down
Reduced file breakage. File slows down as the torque approaches the set torque limit.
Auto Apical Reverse
File stops and reverses when it reaches the end of the set working length.
Auto Apical Slow Down
File slows down as it approaches the end of the set working length, ensuring safe and accurate preparations.
- 1 Apex locator DentaPort Root ZX
- 1 CE measuring cable
- 5 Mucosal electrodes
- 3 File clamps
- 3 Batteries (AA)
- 1 Test plux
- 1 DentaPort TriAuto OTR
- 1 Charger
- 1 Ni-MH battery for handpiece
- 1 Contra angle handpiece with integrated file electrode
- 1 Micromotor 800rpm.
- 1 Repository tray for handpiece
- 1 Handpiece cable
- 1 LS oil spray
- 1 Foot control
- Built-in Apex Locator
- Approx. 430gr | Handpiece: 70gr
- 3x 1.5 V AA-batteries 0.2 V
- Auto Calibration
- Chuck locking Mechanism
- Max. 4.9Ncm
- Max. 800rpm
- Type of Technology
- Optic Adjustment
- Endo Contra-angle
- Two Direction (OTR)
- Auto Saftey Program