Jintai - Dental Lab Wet Model Trimmer

  Out-of-Stock 

Purchase at Moment

Payment After 3 Month

Quarterly repayment with the lowest fees Recharge every three months, 200 million tomman for each season.
 
Notify me when available

  • JT 19
  • Out stock
  • Free

Pay in installments

Choose your plan:

Current plan: 3Month

Description: 30+3

Down payment: $0.00 (25.00%)

Number of payments: 3

Tax: $0.00

Amount of payment: $0.00

Overpayment: $0.00

Total: $0.00

Current plan: Cash

Description: نقدی

Down payment: $0.00 (0.00%)

Number of payments: 1

Tax: $0.00

Amount of payment: $0.00

Overpayment: $0.00

Total: $0.00

Description

Jintai - Dental Lab Wet Model Trimmer

JT 19 Dental Lab Wet Model Trimmer

Features

  • Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve.
  • Connect the waste-disposal tube to the unit.
  • Connect the power cord, and switch on the power switch (O=off, l=on)

- When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18).

- To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).

Specifications 

  • Voltage: 220V/50Hz±10% , 110V/60Hz±10%
  • Power: 500W
  • Rotational Speed: 2800 rpm
  • Dimensions: 44×35×35cm
  • Weight of the dental trimmer: 20kg



Reference : JT 19

Data sheet

  • Jintai
  • China
  • 20kg
  • 500W
  • 220V/50Hz±10%
  • 35*35*44cm

Specific References



Leave a comment about this product

Write your review

Write your review

Jintai - Dental Lab Wet Model Trimmer

Write your review