X- Genus DC X-ray Radiography Unit

X Genus DC is functionally simple in design but at the same time is extremely sophisticated in features and benefits providing a single phase and a high frequency system in one. A system which sets a new standard in quality and safety. It has been engineered to work a high frequency mode. its simple, intuitive anatomical controls assure perfect x-ray radiographic results with any patient and technique. its simplicity of use provides the radiological operator with complete control and a significant savings of time and money.

Mani Feature:

• it is a high frequency system at constant potential, that allows the output of very good quality radiations during every use condition
• xgenus dc can supply 60/70kV or 4/8mA to optimize the diagnostic value of the intra-oral exposures. It reduces the exposure times of 35% in comparison with the single-phase system
• it is properly protected against radiation leakage (according to IEC standard: less than 0,25 mGy/h at 1m, the real value can be considerably less than 0,1 mGy/at 1 m);
• the focus / skin distance of 12-inch (31cm.) (standard) helps to maximize the use of the paralleling technique. - with the short cone (optional) the distance is reduced to 8-inch (20cm.)
• the xgenus timer is a new design suitable to satisfy the most recent hardware and software standards
• it is easy to read and fast to set up. - the huge possibility of choosing the pre-set exposure times can be modified when the operator wants to get values suitable to a more personal use
• it has the possibility to control two x-ray units. This is absolute new as you can connect two xgenus (ac technology) or two xgenus dc, namely: one "ac" + one "dc"
• the exposure time charts are arranged for films type "D""E""F" and for most part of digital imaging systems
• visual and audible signals indicate that the x-ray exposure has been made
• it has the possibility to connect the red warning light (xgenus light) outside the x-ray room
• it has the possibility to connect the exposure control button (with safety key) of the timer outside the x-ray room (xgenus exposure control button)
• the automatic self-test assures proper operation of all electronic functions (error codes immediately indicate any fault)
• the safety key is an additional way to prevent improper use of the unit when the system is switched off
• it displays the line voltage and collect the operating data during the use
• the pantograph arm assures smooth, accurate and firm control. It can be adjusted for 40cm, 80cm (standard),110cm extender arms as well as for unit, ceiling and mobile
• the installation of the system is easy and very fast